# Interior nudging for non active (non T,S) tracers

**URL:** <https://forum.croco-ocean.org/t/interior-nudging-for-non-active-non-t-s-tracers/7258>\
**Category:** biogeochemistry\
**Tags:** forcing\
**Created:** [March 5, 2025, 2:35pm UTC](https://forum.croco-ocean.org/t/interior-nudging-for-non-active-non-t-s-tracers/7258 "2025-03-05T14:35:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Konstantinos\_K](https://forum.croco-ocean.org/letter_avatar_proxy/v4/letter/k/8797f3/32.png) [@Konstantinos\_K](https://forum.croco-ocean.org/u/Konstantinos_K)\
**Post date:** [March 5, 2025, 2:35pm UTC](https://forum.croco-ocean.org/t/interior-nudging-for-non-active-non-t-s-tracers/7258/1 "2025-03-05T14:35:32Z")

</div>

Hi,

Currently there are interior nudging options as explained on this post:

> [@Question about data assimilation](https://forum.croco-ocean.org/t/question-about-data-assimilation/454):
>
> Hello, Is it possible to run interanual croco simulations with data assimilation (like roms 4dvar)?, Or at least to nudge the model sst to satellite data (e.g OSTIA)? Cheers, Lucas.

For SST:  
#undef BULK\_FLUX leads to #define QCORRECTION which corrects surface heat flux with SST nudging.

For ACTIVE tracers (T,S):  
T,S you can use #define ROBUST\_DIAG, which will nudge to what is put in tclm and sclm arrays. Which are defined inside the croco\_clm.nc file.

Is it possible to nudge to other interior tracers such as nutrients e.g. NO3 if such measurements are available?

I see in the set\_nudgcof.F functional that when #define ROBUST\_DIAG, only T, S nudge coefficients are specified and not for the rest of tracers for the interior.

Is there a way to nudge other tracers?

In recent versions of ROMS =\> 3.7 there is an option to specify a separate netCDF file with nudge coefficients for the whole 3D domain. Does this option exist in CROCO too?

And lastly, there are indicative values in the croco.in file for inflow from the boundary (strong nudge) nudge coefficient e.g. TauT\_in = 1, and outflow from the boundary (gentle nudge) e.g. TauT\_out = 360. When ROBUST\_DIAG is activated, the TauT\_out is used. Is there any criterion to what coefficient to use for interior nudging?

Thanks  
Konstantinos
