Abnormal blow up
Hello CROCO Users,
I am setting up a configuration for the coastal region of mediterranean sea with CROCO. Upon using the thrifty crocotools box, I manage to see up my model domain etc. However, I notice my initial condition files were filled with NaN values.
Thinking this might be a one off issue that might to be relevant, I set up my croco.in file and other pre-processing files. On running the model, I was greeted with a flat error!
STEP time[DAYS] KINETIC_ENRG POTEN_ENRG TOTAL_ENRG NET_VOLUME trd
0 0.00000 0.000000000E+00 NaN NaN 9.0658100E+13 0
=======================================
= =
= STEP2D: ABNORMAL JOB END =
= BLOW UP =
= =
=======================================
VMAX (M/S) = NaN
IMAX JMAX = 35 9
IINT IEXT = 1 1
I assume the error is either in my initial condition which has the NaN values (as the Vmax calculated by the model during runtime shows NaN) or my timestep/configuration in croco.in is wrong.
I will be glad if I can be pointed to ways to solve this issue. Thanks
C:\fakepath\croco.in(/upfiles/16533218033242173.in)