# compilation-installation

**URL:** https://forum.croco-ocean.org/c/compilation-installation/7.md?page=1

[Latest](https://forum.croco-ocean.org/latest.md) · [Categories](https://forum.croco-ocean.org/categories.md) · [Tags](https://forum.croco-ocean.org/tags.md)

**Page:** 2

---

## [pisces compilation error](https://forum.croco-ocean.org/t/pisces-compilation-error/376)

<div class="topic-metadata">

**Author:** [@Isa\_bsu](https://forum.croco-ocean.org/u/Isa_bsu)\
**Replies:** 7\
**Last updated:** [August 4, 2022, 12:26pm UTC](https://forum.croco-ocean.org/t/pisces-compilation-error/376 "2022-08-04T12:26:23Z")

</div>

Hi! All, I met the following errors when trying to compile crocs after open the pisces key, however, the configuration without pisces is compiled and run very successful. Can anybody help please? Thanks a lot in advanc…

---

## [Jobcomp Error: Rank mismatch](https://forum.croco-ocean.org/t/jobcomp-error-rank-mismatch/299)

<div class="topic-metadata">

**Author:** [@mariathdz](https://forum.croco-ocean.org/u/mariathdz)\
**Replies:** 7\
**Last updated:** [July 2, 2022, 1:37am UTC](https://forum.croco-ocean.org/t/jobcomp-error-rank-mismatch/299 "2022-07-02T01:37:58Z")

</div>

Hello everybody! I hope they are fine! I have a problem compiling my simulation. I’m just running a simulation of physical parameters for the Gulf of California inlet area. Previously it ran without any problem, but lat…

---

## [init\_arrays\_tile\_](https://forum.croco-ocean.org/t/init-arrays-tile/370)

<div class="topic-metadata">

**Author:** [@Bechir](https://forum.croco-ocean.org/u/Bechir)\
**Replies:** 1\
**Last updated:** [June 22, 2022, 9:20am UTC](https://forum.croco-ocean.org/t/init-arrays-tile/370 "2022-06-22T09:20:19Z")

</div>

I would like compile the last version of croco using the "options=(all-dev)"C:\\fakepath\\jobcomp\_TunCoast.png, unfortenately I obtained the error (see attached file), Any help with many thanks. B

---

## [options=(oce-dev xios test\_cases agrif inter forc pisces sediment mustang oanalysis prepro) & CROCO\_IN](https://forum.croco-ocean.org/t/options-oce-dev-xios-test-cases-agrif-inter-forc-pisces-sediment-mustang-oanalysis-prepro-croco-in/367)

<div class="topic-metadata">

**Author:** [@Bechir](https://forum.croco-ocean.org/u/Bechir)\
**Replies:** 0\
**Last updated:** [June 2, 2022, 9:22am UTC](https://forum.croco-ocean.org/t/options-oce-dev-xios-test-cases-agrif-inter-forc-pisces-sediment-mustang-oanalysis-prepro-croco-in/367 "2022-06-02T09:22:47Z")

</div>

Dears CROCO users, I created a work directory using “create\_config.bash” with the option options=(oce-dev xios test\_cases agrif inter forc pisces sediment mustang oanalysis prepro) it means that CROCO\_IN is not created…

---

## [Error in compilation of large domain (814x519x42)](https://forum.croco-ocean.org/t/error-in-compilation-of-large-domain-814x519x42/347)

<div class="topic-metadata">

**Author:** [@AndresSepulveda](https://forum.croco-ocean.org/u/AndresSepulveda)\
**Replies:** 2\
**Last updated:** [April 11, 2022, 2:02pm UTC](https://forum.croco-ocean.org/t/error-in-compilation-of-large-domain-814x519x42/347 "2022-04-11T14:02:41Z")

</div>

Hi, I have a domain that is if defined BENGUELA\_LR parameter (LLm0=814, MMm0=519, N=42) ! BENGUELA\_LR And I can’t compile (MPI and OPENMP) a basic configuration (plus define TIDES) with v1.2.1, the errors are…

---

## [rip test case setup](https://forum.croco-ocean.org/t/rip-test-case-setup/336)

<div class="topic-metadata">

**Author:** [@tarankalra](https://forum.croco-ocean.org/u/tarankalra)\
**Replies:** 2\
**Last updated:** [February 25, 2022, 5:43pm UTC](https://forum.croco-ocean.org/t/rip-test-case-setup/336 "2022-02-25T17:43:24Z")

</div>

Hi guys I am first time user of croco. I am an old time ROMS user and switching to croco for an application. I am trying to run the rip current test case. In cppdefs.h - I defined rip test case. In jobcomp I have add…

---

## [compile error](https://forum.croco-ocean.org/t/compile-error/240)

<div class="topic-metadata">

**Author:** [@aakashsane](https://forum.croco-ocean.org/u/aakashsane)\
**Replies:** 2\
**Last updated:** [February 18, 2022, 10:41pm UTC](https://forum.croco-ocean.org/t/compile-error/240 "2022-02-18T22:41:53Z")

</div>

I am trying to set up a regional simulation. I am getting the following error: I am attching the text dump from jobcomp C:\\fakepath\\compiledump.txt, my cppdefs C:\\fakepath\\cppdefs.h, and param.h C:\\fakepath\\param.h file…

---

## [NC4PAR with AGRIF](https://forum.croco-ocean.org/t/nc4par-with-agrif/333)

<div class="topic-metadata">

**Author:** [@vcombes](https://forum.croco-ocean.org/u/vcombes)\
**Replies:** 1\
**Last updated:** [February 14, 2022, 3:43pm UTC](https://forum.croco-ocean.org/t/nc4par-with-agrif/333 "2022-02-14T15:43:58Z")

</div>

I m just sharing a solution that works for me If you are unable to compile using: #define NC4PAR #define AGRIF #define AGRIF\_2WAY change “mpif.h” to ‘mpif.h’ in def\_his.F and def\_rst.h It works for me ! (Note th…

---

## [error in jobcomp using gfortran 10 when  AGRIF is define](https://forum.croco-ocean.org/t/error-in-jobcomp-using-gfortran-10-when-agrif-is-define/321)

<div class="topic-metadata">

**Author:** [@EfrainRR](https://forum.croco-ocean.org/u/EfrainRR)\
**Replies:** 1\
**Last updated:** [December 23, 2021, 5:52pm UTC](https://forum.croco-ocean.org/t/error-in-jobcomp-using-gfortran-10-when-agrif-is-define/321 "2021-12-23T17:52:12Z")

</div>

Hello very body I’m working in a new Ubuntu 20.10 machine with gfortran and GCC 10.3.0, and errors during jobcomp compiling was a nightmare. Looking in the forum I found an solution using the following flag in the line …

---

## [Hi!! How could i fix this compilation problem?](https://forum.croco-ocean.org/t/hi-how-could-i-fix-this-compilation-problem/316)

<div class="topic-metadata">

**Author:** [@joel\_arian](https://forum.croco-ocean.org/u/joel_arian)\
**Replies:** 0\
**Last updated:** [October 26, 2021, 10:18pm UTC](https://forum.croco-ocean.org/t/hi-how-could-i-fix-this-compilation-problem/316 "2021-10-26T22:18:37Z")

</div>

---

## [Problems with compiling on Linux Red-hat 6.5 with mpif90](https://forum.croco-ocean.org/t/problems-with-compiling-on-linux-red-hat-6-5-with-mpif90/308)

<div class="topic-metadata">

**Author:** [@Isa\_Su](https://forum.croco-ocean.org/u/Isa_Su)\
**Replies:** 0\
**Last updated:** [August 20, 2021, 4:47pm UTC](https://forum.croco-ocean.org/t/problems-with-compiling-on-linux-red-hat-6-5-with-mpif90/308 "2021-08-20T16:47:30Z")

</div>

Hi! Every one, I met a problem when compiling my crore(only the physics now) on Linux Redhat HPC with mpif90. mpif90 -c -O3 -I/opt/intel/impi/5.0.2.044/intel64/include checkdims\_.f -o checkdims.o checkdims\_.f:210.28: i…

---

## [Problems with compiling on Linux Red-hat 6.5 with mpif90](https://forum.croco-ocean.org/t/problems-with-compiling-on-linux-red-hat-6-5-with-mpif90/307)

<div class="topic-metadata">

**Author:** [@Isa\_Su](https://forum.croco-ocean.org/u/Isa_Su)\
**Replies:** 0\
**Last updated:** [August 20, 2021, 4:46pm UTC](https://forum.croco-ocean.org/t/problems-with-compiling-on-linux-red-hat-6-5-with-mpif90/307 "2021-08-20T16:46:36Z")

</div>

Hi! Every one, I met a problem when compiling my crore(only the physics now) on Linux Redhat HPC with mpif90. mpif90 -c -O3 -I/opt/intel/impi/5.0.2.044/intel64/include checkdims\_.f -o checkdims.o checkdims\_.f:210.28: i…

---

## [I have attached my params.h, cppdefs.h and jobcomp files. while compiling jobcomp it shows error as per the image. Please let me know how to solve it.s](https://forum.croco-ocean.org/t/i-have-attached-my-params-h-cppdefs-h-and-jobcomp-files-while-compiling-jobcomp-it-shows-error-as-per-the-image-please-let-me-know-how-to-solve-it-s/283)

<div class="topic-metadata">

**Author:** [@Kannappan](https://forum.croco-ocean.org/u/Kannappan)\
**Replies:** 5\
**Last updated:** [June 19, 2021, 8:18pm UTC](https://forum.croco-ocean.org/t/i-have-attached-my-params-h-cppdefs-h-and-jobcomp-files-while-compiling-jobcomp-it-shows-error-as-per-the-image-please-let-me-know-how-to-solve-it-s/283 "2021-06-19T20:18:43Z")

</div>

C:\\fakepath\\param.h(/upfiles/16187877597938071.h)(/upfiles/16187877494150524.h)C:\\fakepath\\jobcomp.log

---

## [jobcomp error](https://forum.croco-ocean.org/t/jobcomp-error/297)

<div class="topic-metadata">

**Author:** [@wilamos](https://forum.croco-ocean.org/u/wilamos)\
**Replies:** 0\
**Last updated:** [June 17, 2021, 4:59pm UTC](https://forum.croco-ocean.org/t/jobcomp-error/297 "2021-06-17T16:59:47Z")

</div>

Hello. when executing the ./jobcomp it throws me the following error messages OPERATING SYSTEM IS: Linux file namelist\_pisces exists in Run directory Checking COMPILEAGRIF… cpp: error: testkeys.F: No such file or dir…

---

## [issues with MPI](https://forum.croco-ocean.org/t/issues-with-mpi/268)

<div class="topic-metadata">

**Author:** [@xupeng66](https://forum.croco-ocean.org/u/xupeng66)\
**Replies:** 2\
**Last updated:** [February 12, 2021, 2:44pm UTC](https://forum.croco-ocean.org/t/issues-with-mpi/268 "2021-02-12T14:44:57Z")

</div>

Hello, My parallel simulation with MPI often stops prematurely because of a mystic segmentation fault that seemed to occur at different time steps each time I tried running the same simulation. On the other hand, the se…

---

## [croco error: 395  ERROR: more than one configuration in "cppdefs.h"](https://forum.croco-ocean.org/t/croco-error-395-error-more-than-one-configuration-in-cppdefs-h/254)

<div class="topic-metadata">

**Author:** [@DJ1](https://forum.croco-ocean.org/u/DJ1)\
**Replies:** 2\
**Last updated:** [January 11, 2021, 4:46pm UTC](https://forum.croco-ocean.org/t/croco-error-395-error-more-than-one-configuration-in-cppdefs-h/254 "2021-01-11T16:46:41Z")

</div>

Hi, I tried to run CROCO v1.1 and had an error. I ran the upwelling test case and it worked fine. Then I ran the internal tide case and I had the following errors. ERROR: more than one configuration in “cppdefs.h”. RE…

---

## [Problem in compiling while defining PISCES and AGRIF (nesting) in CPPKEYS](https://forum.croco-ocean.org/t/problem-in-compiling-while-defining-pisces-and-agrif-nesting-in-cppkeys/241)

<div class="topic-metadata">

**Author:** [@spurgeondsk](https://forum.croco-ocean.org/u/spurgeondsk)\
**Replies:** 0\
**Last updated:** [January 5, 2021, 6:54am UTC](https://forum.croco-ocean.org/t/problem-in-compiling-while-defining-pisces-and-agrif-nesting-in-cppkeys/241 "2021-01-05T06:54:05Z")

</div>

I am facing problem while compiling PISCES model with nesting options and ending up with the error as follows trcini\_pisces\_.f90(3266): error #6404: This name does not have a type, and must have an explicit type. \[MMM…

---

## [curl compilation error](https://forum.croco-ocean.org/t/curl-compilation-error/213)

<div class="topic-metadata">

**Author:** [@AndresSepulveda](https://forum.croco-ocean.org/u/AndresSepulveda)\
**Replies:** 0\
**Last updated:** [September 9, 2020, 9:04pm UTC](https://forum.croco-ocean.org/t/curl-compilation-error/213 "2020-09-09T21:04:30Z")

</div>

Hi, I want to compile croco\_v1.1 when I found this error, related to the curl library. Which flag should I modify to specify its location? /usr/lib/x86\_64-linux-gnu/libcurl-gnutls.a /usr/lib/x86\_64-linux-gnu/libcurl-…

---

## [Jobcomp error: while compiling with define biology and define bulk fluxes](https://forum.croco-ocean.org/t/jobcomp-error-while-compiling-with-define-biology-and-define-bulk-fluxes/200)

<div class="topic-metadata">

**Author:** [@spurgeondsk](https://forum.croco-ocean.org/u/spurgeondsk)\
**Replies:** 6\
**Last updated:** [September 6, 2020, 5:45am UTC](https://forum.croco-ocean.org/t/jobcomp-error-while-compiling-with-define-biology-and-define-bulk-fluxes/200 "2020-09-06T05:45:07Z")

</div>

Hai everyone When I define both biology (nchlazd/PICESES) and bulk fluxes together in cppdefs.h, I am ending up with the following error bulk\_flux\_.f(489): error #6418: This name has already been assigned a data type. …

---

## [Problem compiling master branch with OPENMP](https://forum.croco-ocean.org/t/problem-compiling-master-branch-with-openmp/207)

<div class="topic-metadata">

**Author:** [@AndresSepulveda](https://forum.croco-ocean.org/u/AndresSepulveda)\
**Replies:** 2\
**Last updated:** [August 24, 2020, 4:16pm UTC](https://forum.croco-ocean.org/t/problem-compiling-master-branch-with-openmp/207 "2020-08-24T16:16:27Z")

</div>

I would like to compile the latest code (master branch, downloaded today) using OPENMP. I am getting the following error, anyidea what is the issue? The error shows at the end. … dpremix.o t3dpremix.o update3D.o zoomb…

---

## [Error during jobcomp](https://forum.croco-ocean.org/t/error-during-jobcomp/168)

<div class="topic-metadata">

**Author:** [@satriayuki](https://forum.croco-ocean.org/u/satriayuki)\
**Replies:** 2\
**Last updated:** [August 13, 2020, 7:35pm UTC](https://forum.croco-ocean.org/t/error-during-jobcomp/168 "2020-08-13T19:35:27Z")

</div>

hello, i have a problem with CROCO during jobcomp. When i type sudo ./jobcomp, this happen. Anyone know how to solve this problem? OPERATING SYSTEM IS: Linux cp: cannot stat ‘…/croco/OCEAN/PISCES/namelist\_pisces\*’: No …

---

## [error in linking ww3\_gspl when compiling ww3 in coupled mode](https://forum.croco-ocean.org/t/error-in-linking-ww3-gspl-when-compiling-ww3-in-coupled-mode/191)

<div class="topic-metadata">

**Author:** [@Gump](https://forum.croco-ocean.org/u/Gump)\
**Replies:** 9\
**Last updated:** [July 10, 2020, 1:32pm UTC](https://forum.croco-ocean.org/t/error-in-linking-ww3-gspl-when-compiling-ww3-in-coupled-mode/191 "2020-07-10T13:32:08Z")

</div>

I am compiling ww3 in an ocean-wave coupled mode on a Mac system. An error occurs as follows: Processing ww3\_gspl ad3 : processing ww3\_gspl Linking ww3\_gspl link with oasis \*\*\* error in linking \*\*\* Undefined symbols…

---

## [fatal error: netcdf.inc jobcomp from \[Scarlett Martinez\]](https://forum.croco-ocean.org/t/fatal-error-netcdf-inc-jobcomp-from-scarlett-martinez/63)

<div class="topic-metadata">

**Author:** [@gcambon](https://forum.croco-ocean.org/u/gcambon)\
**Replies:** 4\
**Last updated:** [March 5, 2020, 5:31pm UTC](https://forum.croco-ocean.org/t/fatal-error-netcdf-inc-jobcomp-from-scarlett-martinez/63 "2020-03-05T17:31:57Z")

</div>

Hi everybody! I’m gong to start work with croco, I have two questons… Is there a forum for croco or is this just like agrif? when I compile croco with jobcomp I GET: gfortran -c -O3 -fdefault-real-8 -fdefault-double-…

---

## [Setting up CROCO - Fatal error during jobcomp](https://forum.croco-ocean.org/t/setting-up-croco-fatal-error-during-jobcomp/159)

<div class="topic-metadata">

**Author:** [@GRautenbach](https://forum.croco-ocean.org/u/GRautenbach)\
**Replies:** 1\
**Last updated:** [November 22, 2019, 9:04am UTC](https://forum.croco-ocean.org/t/setting-up-croco-fatal-error-during-jobcomp/159 "2019-11-22T09:04:19Z")

</div>

Hi everyone, I am new to CROCO, and am trying to set it up onto my personal pc. I have managed to download all the necessary compilers and libraries; however, when I try to run the ./jobcomp command, I get the followin…

---

## [Problem with installation](https://forum.croco-ocean.org/t/problem-with-installation/136)

<div class="topic-metadata">

**Author:** [@Socren](https://forum.croco-ocean.org/u/Socren)\
**Replies:** 1\
**Last updated:** [August 28, 2019, 9:58am UTC](https://forum.croco-ocean.org/t/problem-with-installation/136 "2019-08-28T09:58:31Z")

</div>

Hello everyone. I want to learn to use this tool, but I can’t install it. I found a little tutorial in your Documentation tab, but it is not enough. Please, could someone give me a tutorial for Dummies? I have Windows …

---

## [Download croco\_tools](https://forum.croco-ocean.org/t/download-croco-tools/101)

<div class="topic-metadata">

**Author:** [@mzapatahe](https://forum.croco-ocean.org/u/mzapatahe)\
**Replies:** 2\
**Last updated:** [July 18, 2019, 8:37pm UTC](https://forum.croco-ocean.org/t/download-croco-tools/101 "2019-07-18T20:37:10Z")

</div>

Hello, The link to clone croco tools don’t exist or I don’t have permission, Do you what happen? croco-ocean / croco\_tools · GitLab BR

---

## [jobcomp compilation](https://forum.croco-ocean.org/t/jobcomp-compilation/111)

<div class="topic-metadata">

**Author:** [@Pouvard](https://forum.croco-ocean.org/u/Pouvard)\
**Replies:** 0\
**Last updated:** [June 24, 2019, 12:15pm UTC](https://forum.croco-ocean.org/t/jobcomp-compilation/111 "2019-06-24T12:15:07Z")

</div>

\-I am using the model roms (2014 version ) in Ubuntu 18.04.2 and I used the matlab 2017. -I kept the BENGUELA example to test the roms running (I kept all the files in Run directory "romstools\_param.m, cppdefs.h, roms.i…

---

## [debug options](https://forum.croco-ocean.org/t/debug-options/77)

<div class="topic-metadata">

**Author:** [@swen\_test](https://forum.croco-ocean.org/u/swen_test)\
**Replies:** 1\
**Last updated:** [March 14, 2019, 10:21pm UTC](https://forum.croco-ocean.org/t/debug-options/77 "2019-03-14T22:21:28Z")

</div>

What are the debug compilation options for ifort?

[Previous page](https://forum.croco-ocean.org/c/compilation-installation/7.md)
